How to disable the touchpad on a laptop is the easiest? Why is he even needed?
The question of how to disable the touchpad on a laptop, it is not so rare. Now we will understand what is hidden behind this word. Essentially, this is a manipulator that is built into the laptop and can completely replace the mouse. Most PC users are accustomed to working as a regular device of this class, and therefore it is not always immediately possible to reorganize to innovation. The solution in this situation suggests itself - to disable the touchpad and instead connect a standard mouse to the universal serial bus port. Also to the USB connector network card for a laptop can be connected, for example.
Conditionally there are 2 ways to disable this device. The first is mechanical. On the keyboard of each mobile device there is a key combination that allows you to turn it off. The second method is software.There are already possible various options: using BIOSa, using specialized software, disabling the driver. Any of the above options are great for such an operation.
How to disable the touchpad on a laptop? Keyboard
Conventionally, the keyboard of any modern laptop can be divided into 2 parts. The first is the main, that is, standard character set. But its capabilities are often lacking. Therefore, to solve this problem, most of the keys have additional characters and a special “Fn” key. Now we will answer this question: "How to disable the touchpad on a laptop?" To do this, it’s quite enough to immediately press “Fn” and, without releasing it, press the key that shows either the mouse or the touchpad (the image depends on the device model and the manufacturer). The main disadvantage of this method is that every time you boot, you need to disable the built-in manipulator. If it is necessary that it is constantly turned off, then this method does not quite fit.
Another way in which you can perform such a manipulation is to use the capabilities of the BIOS. When booting the PC, we clamp “Del”. With this we go into the BIOS: here you need to find the item "Advanced".In its points we find the touchpad (parameter Internal Pointing Device) and disable it using the “PgUp” or “PgDn” keys. The value should change from “Enabled” (enabled) to “Disabled” (disabled). This is not a very convenient way, and it is only suitable for advanced users. But, on the other hand, such an approach completely deactivates the manipulator. A similar principle exists in the operating system itself. Through the device manager (located at: "Start \ Control Panel \ System") you can disable the driver. The effect of this will be exactly the same. So you can turn off any equipment that is included in the PC, for example, turn off the sound card. Then, answering the question of how to connect headphones to a laptop, it should be borne in mind that they will not turn on. The sound device is disabled, the laptop will work completely in silent mode. There are also various specialized software products with which you can perform a similar procedure. At the same time, there is a whole bunch of flaws - you need this software to download, install, understand the interface. And not always it perfectly fits in with the PC hardware, and because of this you may not get the desired result.
The article describes how to disable the touchpad on a laptop.As practice shows, the easiest way to perform such manipulation with the help of drivers, and this method can be recommended to most users. The remaining versions are much more complicated and require special training.